C952i Entertainment Power Connection
The entertainment power port on the C952i treadmill provides a
Informational Displays
(C954i, C956i, C966i)
The treadmill provides information about its use (odometer and hour meter), as well as software version, error log, and serial number. In general, you would only access this information if directed to do so by Precor Customer Support.
These instructions guide you through all the informational displays. Pressing the ENTER key moves you through the displays. To exit, press the RESET key at any time.
Viewing the Odometer
1.At the Precor banner, press the following keys in sequence and without pause:
RESET, 6, 5
ODOMETER appears on the display followed by the odometer value (the number of cumulative miles or kilometers users have taken).
2.When you are ready, press ENTER to move to the next display (hour meter).
Viewing the Hour Meter
HOUR METER appears on the display followed by the number of hours that the unit has been in use. The treadmill tracks the elapsed minutes, but the value that appears is truncated to the nearest full hour.
3.When you are ready, press ENTER to move to the next display (software version).
Viewing the Software Version and Part Numbers
SW VERSION (C954i) or SOFTWARE VERSION (C956i and C966i) appears on the display followed by the upper board application software part number and version (for example,
4.To see the upper boot and lower board application software version, use the CHANGE key (C954i) or arrow keys (C956i and C966i). If needed, you can move through all
Note: If a part number does not exist,
5.Write the numbers below. You will need these numbers when you call Customer Support with
Upper Software P/N: _____________
Lower Software P/N: ___________________
Upper Boot Application P/N: ___________________
6.When you are ready, press ENTER to move to the next display (error log).
Product Owner’s Manual: Club Features | 16 |