Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly instructions. If you do not assemble the treadmill according to these guidelines, you could void the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the treadmill except for maintenance tasks as described in the Product Owner’s Manual. If any items are missing, contact your dealer. Should you need more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor website at www.precor.com/contact.
Unpacking the Equipment
The unit is shipped in one box. Ask for help from two or more people to unpack and assemble the treadmill.
Required Tools
•
•String
•SAE Standard socket set
•Bubble level
•Wire tie cutter
Installation Requirements
Follow these installation requirements when assembling the unit:
•Assemble the unit near the location where you plan to use it.
•Provide ample space around the unit. The minimum space requirement needed for user safety and proper maintenance is three feet by six feet (one meter by two meters) square, directly behind the running belt.
•Set up the unit on a solid, flat surface. A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions.
•Open the box and assemble the components in the sequence presented in this guide.
•Leave room for adjustments. Tighten fasteners (bolts, nuts, and screws) so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed to do so.
Commercial Treadmill Assembly Guide | 1 |