Adjusting the Running Belt
If you are unsure about adjusting the running belt, call Precor Customer Support (see Obtaining Service).
CAUTION: To ensure your safety, use the I/O power switch to turn OFF the treadmill before making any adjustments. Do not adjust the running belt when someone is standing on the unit.
1.Locate the right belt adjustment bolt in the rear end cap of the treadmill. Refer to Diagram 9.
Diagram 9: Adjusting belt location
To determine left and right, stand at the rear of the treadmill and face the display. Make all belt adjustments on the right rear corner bolt using the hex key provided.
•If the belt is off center to the LEFT, turn the adjusting bolt ¼ turn counterclockwise, which moves the running belt to the right.
•If the belt tracks off center to the RIGHT, turn the bolt ¼ turn clockwise; this moves the belt to the left.
Important: Do not turn the adjusting bolt more than ¼ turn at a time. Overtightening the bolt can damage the treadmill.
2. Recheck the alignment of the running belt.
Servicing the Treadmill
Do not attempt to service the treadmill yourself except for the maintenance tasks described in this manual. The unit does not contain any
Long-Term Storage
When the treadmill is not in use for any length of time, turn it OFF. Ensure that the power cord is unplugged from its power source and is positioned so that it will not become damaged or interfere with people or other equipment.
Product Owner’s Manual: Maintenance | 21 |