Precor C934 owner manual Club Information, Changing the Club Settings

C O M M E R C I A L P R O D U C T S D I V I S I O N

Club Information

These next few pages provide information that lets you customize the treadmill for your Club. It is not information that your customer needs or, necessarily, should see. This section covers the following information about how to:

•select the unit of measure: U.S. standard or Metric

•set maximum speed, workout, and pause times

•display the odometer and other useful information

•connect to CSAFE compatible devices

Note: If your customers are interested in the learning more about the C934 treadmill, you may wish to direct them to the manual available on Precor’s web site (www.precor.com). (The manual that appears on the web site does not contain the information found in this section.)

Diagram 19 Display console keypad.

Gently, press and hold the ▼ or ▲ key to view the available selections.

CHANGING THE CLUB SETTINGS

The Club “custom” settings are accessed through specific codes that help eliminate unauthorized access. Refer to Diagram 19to locate the keys. Information that you can access and features that can be customized are as follows:

•Units of Measure — Select between U.S. Standard and Metric displays.

•Maximum Speed — Determines the maximum speed that a user can select. Selections range between 0.5 to 11 mph (1 - 18 kph).

•Maximum Workout Time — Sets a maximum limit on workout time.

Note:Remember that the user will get an additional five-minute cool down period appended to a completed course. So, adjust the maximum time limit accordingly.

•Maximum Pause Time — Sets the maximum duration in which a person can “pause” his or her workout.

•Odometer, Hours of Use, Software Version, and Error Log —The treadmill stores the cumulative miles or kilometers, the number of hours that the unit has been in use, the software version and software type (which is valuable when calling Customer Support), and an error log (useful when troubleshooting).

page 23