Precor C934 owner manual Determining the Club Speed Limit, Setting a Workout Time Limit, To 18 kph

Page 25

C O M M E R C I A L P R O D U C T S D I V I S I O N

DETERMINING THE CLUB SPEED LIMIT

You can set the maximum speed for the treadmill. This limits how fast the running belt moves and, consequently, how many adjustments a user can make to the treadmill’s speed. The speed is displayed in miles per hour (mph) or kilometers per hour (kph) depending upon the units of measure (Metric or U.S. standard) that are selected.

The ▼▲ keys let you choose a speed between: 0.5 to 11.0 mph

1 to 18 kph

Important: If you select a number that limits the miles per hour, your change will not affect the kilometers per hour (and vice versa). The treadmill does not convert the speed entered in miles per hour (U.S. standard) to kilometers per hour (Metric). It stores separate numbers for the different units of measure.

SETTING A WORKOUT TIME LIMIT

You can limit how long a user works out by setting a duration between 1 and 240 minutes. The treadmill also lets you choose “INFINITE” (found at the zero point be- tween 240 and 1) which allows the user to select a course and work out indefinitely.

Note: The QuickStart program is automatically limited to the Club limit. However, if a user presses QUICKSTART at the Precor banner, and the Club program has limited workout time to less than 30 minutes, then that duration takes effect. For example, if you set the workout time limit to 20 minutes, the tread- mill allows users to specify a workout between 1 and 20 minutes. Users cannot specify a time longer than 20 minutes.

Important: Exceptions to the rule above include the Cross Country course (set at 30 minutes) and the Weight Loss course (set at 28 minutes).

Use the ▼▲ keys to select a workout time limit. Touch either ▼▲ key and the display changes in one minute increments. Press and hold the or key and the numbers advance or decrease faster. Take into account that the user may get an additional five-minute cool down period appended to his or her workout (depending on course selection), so adjust the maximum time limit accordingly.

Note: If the workout time is set to INFINITE, users can workout indefinitely, so no cool-down period is appended to the course selection.

SETTING A PAUSE TIME LIMIT

Setting a Pause time limit is useful because the treadmill returns to the Precor banner at a selected interval after the Stop key is pressed whether the user planned to return or not.

Use the ▼▲ keys to set a Pause time limit between 1 and 120 seconds (two minutes).

page 25

Image 25
Contents C934 Important Safety Instructions Grounding Instructions Safety ApprovalTable of Contents Exercising on the Treadmill MaintenanceCourses European Applications Radio Frequency Interference RFIVoid the user’s authority to operate the equipment About this Manual Obtaining ServiceM M E R C I a L P R O D U C T S D I V I S I O N Standard Equipment Unpacking the TreadmillOther Equipment Additional Tools Needed Hardware KITInstallation Requirements Setting Up the TreadmillAssembly Instructions Diagram Route cable Csafe Secure the display console to the upright supports. DiagramRaise Perform steps a. and b. on the opposite side Attach handrails to the side and base brackets. DiagramTest the heart rate feature. Diagram Continue with the assembly Second Level Unit Turning the Unit on and OFF If the running belt Then Checking the Alignment of the Running BeltClub Information Changing the Club SettingsDetermining the Units of Measure Display key functions within the Club Custom ModeSetting a Pause Time Limit Setting a Workout Time LimitDetermining the Club Speed Limit To 18 kphM M E R C I a L P R O D U C T S D I V I S I O N User ID Entry Program Keys Using Csafe Standard EquipmentC934 Display Features on the Display ConsoleSmartrate Display Setup Mode and PromptsWeight prompt Following occurs Setup Mode and the Quickstart FeaturePrecor banner Course prompt Display Features During a Workout M M E R C I a L P R O D U C T S D I V I S I O N Keypad keys Keys on the Display ConsolePrompts Default Value Quickstart Default ValuesChanging the Display Features Using the Select KEY Using the Handrails Using the Security ClipUsing the Heart Rate Touch Capability Exercising on the TreadmillWorkout Tips Keypad TipsQuick Steps to Working OUT To display the course selections, press Enter and then Stop Cooling Down After a WorkoutStop PAUSE, Workout SUMMARY, and Exit FeaturesUsing the Smartrate Feature Heart Rate FeatureCourses Rate Manual Mode and the Quickstart KEYInterval Course Cross Country CourseTo use the interval course, take the following steps Random Course Weight Loss CourseHeart Rate Course Cleaning the Equipment MaintenanceInspection Perform a daily inspection of the treadmillAligning the Running Belt Servicing the Treadmill Storing the Polar Chest StrapLong Term Storage C934 C934 C934 C934 C934 C934 C934 C934 Thank You and Welcome to Precor Product Serial Numbers Date of Purchase Purchased from Dealer namePlease indicate the type and number of products purchased How many members do you have?Warranty Periods and Coverage Limited WarrantyConditions and Restrictions Complete this portion and keep for your recordsC934 Programs C934 Display Readouts Product Specifications Electronic Specifications