Precor C934 owner manual Using Csafe Standard Equipment, User ID Entry Program Keys

Page 27

C O M M E R C I A L P R O D U C T S D I V I S I O N

USING CSAFE STANDARD EQUIPMENT

The C934 is fully compatible with CSAFE protocols. If the unit is connected to a CSAFE master device, the user will be prompted to enter a user ID. Five zeros appear on the display. The left zero blinks to indicate that it is awaiting input. The following table provides information about the keypad functions:

User ID Entry:	Program Keys
INCLINE ▼ or ▲	moves the blinking LED from field to field.
SPEED ▲ or ▼	changes the number value in the selected field.
ENTER	submits the displayed user ID. Note that if the 5 zeros are
	being displayed when the user presses ENTER, user ID.
	entry is bypassed and the COURSE prompt appears.
RESET	resets the display to the Precor banner.

A message indicates when the user ID is accepted by the CSAFE master device. Then, the COURSE prompt is displayed. See Quick Steps to Working Out on page 37.

To review information about CSAFE specifications, visit the web site at:

www.fitlinxx.com/csafe

Additional CSAFE commands supported by the C934 software include:

SetProgram, SerUserInformation, GetUserInformation, GetOdometer, and GetErrorCode

page 27

Image 27

Contents C934 Important Safety Instructions Grounding Instructions Safety ApprovalTable of Contents Maintenance Exercising on the TreadmillCourses Radio Frequency Interference RFI European ApplicationsVoid the user’s authority to operate the equipment About this Manual Obtaining ServiceM M E R C I a L P R O D U C T S D I V I S I O N Unpacking the Treadmill Standard EquipmentOther Equipment Additional Tools Needed Hardware KITSetting Up the Treadmill Installation RequirementsAssembly Instructions Diagram Route cable Csafe Secure the display console to the upright supports. DiagramRaise Perform steps a. and b. on the opposite side Attach handrails to the side and base brackets. DiagramTest the heart rate feature. Diagram Continue with the assembly Second Level Unit Turning the Unit on and OFF If the running belt Then Checking the Alignment of the Running BeltClub Information Changing the Club SettingsDetermining the Units of Measure Display key functions within the Club Custom ModeTo 18 kph Setting a Workout Time LimitSetting a Pause Time Limit Determining the Club Speed LimitM M E R C I a L P R O D U C T S D I V I S I O N User ID Entry Program Keys Using Csafe Standard EquipmentC934 Display Features on the Display ConsoleSmartrate Display Setup Mode and PromptsSetup Mode and the Quickstart Feature Weight prompt Following occursPrecor banner Course prompt Display Features During a Workout M M E R C I a L P R O D U C T S D I V I S I O N Keypad keys Keys on the Display ConsolePrompts Default Value Quickstart Default ValuesChanging the Display Features Using the Select KEY Exercising on the Treadmill Using the Security ClipUsing the Handrails Using the Heart Rate Touch CapabilityKeypad Tips Workout TipsQuick Steps to Working OUT To display the course selections, press Enter and then Stop Cooling Down After a WorkoutStop PAUSE, Workout SUMMARY, and Exit FeaturesHeart Rate Feature Using the Smartrate FeatureCourses Rate Manual Mode and the Quickstart KEYCross Country Course Interval CourseTo use the interval course, take the following steps Random Course Weight Loss CourseHeart Rate Course Perform a daily inspection of the treadmill MaintenanceCleaning the Equipment InspectionAligning the Running Belt Storing the Polar Chest Strap Servicing the TreadmillLong Term Storage C934 C934 C934 C934 C934 C934 C934 C934 Thank You and Welcome to Precor How many members do you have? Date of Purchase Purchased from Dealer nameProduct Serial Numbers Please indicate the type and number of products purchasedComplete this portion and keep for your records Limited WarrantyWarranty Periods and Coverage Conditions and RestrictionsC934 Programs C934 Display Readouts Product Specifications Electronic Specifications