Miele T4819Ci operating instructions

Page 11

Warning and Safety instructions

￿Danger.

This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device).

If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust.

￿To prevent the risk of fire, the following must not be tumble dried:

items which have been cleaned using chemicals (e.g. professional dry-cleaning agents).

fabrics which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling.

damaged items which contain padding or fillings (e.g. pillows, jackets). When damaged, the filling can get out with the risk of igniting in the dryer.

￿In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry self-igniting). The programme is not finished until the cooling down phase has been completed.

As soon as the programme has finished, remove all laundry from the drum.

￿Fabric conditioner and similar products must be used according to the instructions on the manufacturer's packaging.

￿Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up.

￿Always close the door after use. This way you will avoid the danger of:

– children climbing into the dryer or hiding things in it.

– pets or other small animals climbing into it.

11

Image 11
Contents Operating instructions For condenser tumble dryer T 4819 Ci Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerFollowing are also selected via the display Programme duration / Estimated time remainingDisplay shows Ironing Garment care label symbolsTips on drying DryingTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryDrying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Delicates Max. load 2 kg Normal, Hand iron Cottons Max. load 6 kg Extra dry, NormalHand iron, Machine iron Minimum iron Max. load 3 kg Normal, Hand ironProgramme chart Gentle smoothing Max. load 1 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 6 kg Warm air Max. load 6 kgAdding or removing laundry after a programme has started Altering Delay startChanging the programme sequence Once a programme has startedTo deactivate the lock Electronic system lockTo activate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideTo switch off this warning Problem Possible cause RemedyAirways indicator To switch off thisDisplay is dark Problem Possible cause Remedy Start/Stop button isProgramme indicator Flashing slowlyAn unsatisfactory drying result Goes on too long or Other problemsProblem Possible cause Remedy Drying process Even switches offDryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Power cutChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Room ventilation Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Electrical connection U.K Non-rewireable plugs BSElectrical connection Woollens handcare Consumption dataTechnical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeFollow the steps ,, ... to programme and store in memory Factory default. Not in current programmeStandby OffFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000