Miele T4819Ci operating instructions Keypad tone

Page 65

Programmable functions

Keypad tone

An audible tone sounds each time a button is pressed.

Follow the steps (,, ...) to programme and store in memory.

Before you begin, ensure that:

–The tumble dryer is switched off.

–The door is closed.

Press the Start/Stop button and keep it pressed in whilst carrying out steps

-.

Switch the dryer on.

Wait until the Start/Stop button lights up constantly . . .

. . . and then release the Start/Stop button.

Press the Low temperature button nine times.

–The Low temperature indicator light will flash on and off slowly once and then on and off quickly once.

A number to show which option is selected will appear in the display alternating with the letter P.

0Keypad tone deactivated (factory default setting)

IKeypad tone activated

(the Automatic plus indicator light will also flash)

Pressing the Start/Stop button switches between the options.

Switch the dryer off.

The setting you have selected is now stored in memory. You can change it again at any time.

To check the setting:

Carry out steps to .

Switch the dryer off after step .

65

Image 65

Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerFollowing are also selected via the display Programme duration / Estimated time remainingDisplay shows Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerDrying level programmes Select any Extra options / Delay startSelect a programme Remove the laundry at the end of the programme Start the programmeBefore the end of a programme Extra options Extra options / Delay startDelay start Hand iron, Machine iron Cottons Max. load 6 kg Extra dry, NormalMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Cool air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 6 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedTo deactivate the lock Electronic system lockTo activate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off this To switch off this warningProgramme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is darkAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long orBeen cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Room ventilation Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Electrical connection U.K Non-rewireable plugs BSElectrical connection Woollens handcare Consumption dataTechnical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeStandby Factory default. Not in current programmeOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000