Miele T4819Ci Other problems, Problem Possible cause Remedy Drying process, Goes on too long or

Page 37

Problem solving guide

Other problems

Problem

Possible cause

Remedy

The drying process

In some circumstances, the

Please check all the

goes on too long or

Clean out airways indicator

possible causes and

even switches off.

light still comes on, even

switch the dryer off and

 

though the filters are clean.

then back on again.

 

Ventilation to and from the

Open a door or window

 

dryer may be insufficient,

while the dryer is in

 

e.g. because it is installed in

operation for increased air

 

a room which is too small.

flow.

 

This can cause the

 

 

 

temperature in the room to

 

 

 

rise sharply.

 

 

 

The vents below the door are

Remove any objects

 

blocked.

 

that are blocking the

 

 

 

vents.

 

The fluff filters are clogged

Remove any fluff.

 

up with fluff or were still wet

– The fluff filters must be

 

when they were replaced.

 

completely dry.

 

Detergent residues, hair and

Check the condenser unit

 

fine fibres can block the

from time to time and

 

condenser unit.

clean it if necessary.

 

The laundry has not been

Make sure that your

 

spun sufficiently.

laundry is thoroughly spun

 

 

at the appropriate spin

 

 

speed in the washing

 

 

machine.

 

The tumble dryer has been

Do not exceed the

 

overloaded.

maximum load for the

 

 

programme selected.

 

Metallic components, e.g.

– Open zips next time.

 

zips have prevented the

If the problem occurs

 

dryer from registering the

again, dry garments with

 

correct moisture level in the

long zips using the Warm

 

laundry.

air programme (timed

 

 

drying).

37

Image 37
Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect a programme Select any Extra options / Delay startDrying level programmes Before the end of a programme Start the programmeRemove the laundry at the end of the programme Delay start Extra options / Delay startExtra options Hand iron, Machine iron Cottons Max. load 6 kg Extra dry, NormalMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Cool air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 6 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off this To switch off this warningProgramme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is darkAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long orBeen cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteLevelling the appliance Room ventilation Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Woollens handcare Consumption dataTechnical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeStandby Factory default. Not in current programmeOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000