Miele T4819Ci operating instructions Start the programme, Before the end of a programme

Page 19

How to dry correctly

Start the programme

The Start/Stop button will flash when a programme is being selected. The flashing indicates that a programme can be started.

Press the Start/Stop button.

The Start/Stop button will now light up constantly.

The Perfect Dry indicator will flash or light up constantly with the sensor controlled drying programmes. It will not come on at all with timed drying programmes (see "Operating the tumble dryer").

Please note: The duration shown in the display is an estimate and can vary.

Before the end of a programme

There is a cooling down phase at the end of the drying sequence (Cooling down will light up). The programme will not finish until the cooling down phase has been completed.

There is no cooling down phase at the end of the Woollens handcare programme.

Remove the laundry at the end of the programme

0 and Finish will appear in the display to indicate that the programme has finished. The buzzer (if selected) will sound at intervals.

The drum will continue to rotate at intervals for up to two hours to prevent laundry creasing, if you do not wish to remove it immediately (anti-crease). There is no anti-crease phase at the end of the Woollens handcare programme.

Press the Door button.

Open the door.

Remove the laundry.

Check that all items have been removed from the drum. If items are left in the dryer, they could be damaged by overdrying when the dryer is next used.

If the dryer is switched on at the mains and the door is opened, the drum lighting will come on. It will go out a few minutes later to save energy.

Press the button to switch the dryer off.

Clean the fluff filters.

Close the door.

Empty the condensed water container (unless the dryer has been connected for external drainage).

The condenser unit should be checked and cleaned on a regular basis (see "Cleaning and care").

19

Image 19

Contents Operating instructions For condenser tumble dryer T 4819 Ci Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Ironing Garment care label symbolsTips on drying DryingTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundrySelect a programme Select any Extra options / Delay startDrying level programmes Before the end of a programme Start the programmeRemove the laundry at the end of the programme Delay start Extra options / Delay startExtra options Delicates Max. load 2 kg Normal, Hand iron Cottons Max. load 6 kg Extra dry, NormalHand iron, Machine iron Minimum iron Max. load 3 kg Normal, Hand ironProgramme chart Gentle smoothing Max. load 1 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 6 kg Warm air Max. load 6 kgAdding or removing laundry after a programme has started Altering Delay startChanging the programme sequence Once a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideTo switch off this warning Problem Possible cause RemedyAirways indicator To switch off thisDisplay is dark Problem Possible cause Remedy Start/Stop button isProgramme indicator Flashing slowlyAn unsatisfactory drying result Goes on too long or Other problemsProblem Possible cause Remedy Drying process Even switches offDryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Power cutChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteLevelling the appliance Room ventilation Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Woollens handcare Consumption dataTechnical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeFollow the steps ,, ... to programme and store in memory Factory default. Not in current programmeStandby OffFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000