Miele T4819Ci Installation site, Building under a continous worktop / in a kitchen run

Page 42

Installation

Installation site

Make sure the dryer door can be opened without hindrance after installation.

Building under a continous worktop / in a kitchen run

This tumble dryer is specially designed for installation under a continuous worktop run in a fitted kitchen.

N = Niche height (820-930 mm)

When moving the dryer do not lift it by the drum door.

The dryer is supplied fitted with a cover plate instead of a machine lid. The cover plate is necessary to ensure electrical safety and must not be removed.

–Slides* can be used to protect the floor from damage when the machine is pushed into position or taken out for servicing.

–The electrical socket must be located in an accessible position near the tumble dryer.

Please note:

Niche height	Additional accessories
	required
820 mm	None

from	Fit longer screw feet* (set to
830-840 mm	approx. 40 mm)

from	One raising kit*
870-885 mm
from	Two raising kits*
915-930 mm

* these accessories are available to order

The tumble dryer must not be used without the front panel in place.

If the kitchen run has a continuous furniture plinth in place, a gap must be made for the tumble dryer.

42

Image 42

Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Start the programme Before the end of a programmeRemove the laundry at the end of the programme Extra options / Delay start Delay startExtra options Minimum iron Max. load 3 kg Normal, Hand iron Cottons Max. load 6 kg Extra dry, NormalHand iron, Machine iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Warm air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 6 kg Gentle smoothing Max. load 1 kgOnce a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off this Problem Possible cause RemedyAirways indicator To switch off this warningFlashing slowly Problem Possible cause Remedy Start/Stop button isProgramme indicator Display is darkAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runBefore moving the tumble dryer again e.g. when moving house Levelling the appliance Room ventilationWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesOff Factory default. Not in current programmeStandby Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000