Miele T4819Ci After Sales service, Repairs, Future updates PC, Appliance guarantee

Page 40

After Sales service

Repairs

In the event of any faults which you cannot remedy yourself, please contact

–your Miele dealer or

–the Miele Service Department (see back cover for contact details).

When contacting your dealer or the Service Department, please quote the model and serial number of your appliance, both of which are shown on the data plate. This is visible when you open the door.

N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions.

Future updates (PC)

The indicator or check light marked PC on the fascia panel is the interface used by the Miele service technicians during service work for testing purposes and for updating the appliance's programme data.

Appliance guarantee

In the U.K. your appliance is guaranteed for 2 years from the date of purchase. However you must activate your cover by calling 0845 365 6640 or registering online at www. miele.co.uk.

For information on the appliance guarantee specific to your country please contact Miele. See back cover for contact details.

Optional accessories

Optional accessories for this dryer are available from your Miele Dealer, the Miele Spare Parts Department or via the internet at www.miele-shop.com.

Please note that telephone calls may be monitored and recorded for training purposes.

40

Image 40

Contents Operating instructions For condenser tumble dryer T 4819 Ci Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Select any Extra options / Delay startDrying level programmes Before the end of a programme Start the programmeRemove the laundry at the end of the programme Delay start Extra options / Delay startExtra options Cottons Max. load 6 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Shirts Max. load 2 kg Normal, Hand iron Cool air Max. load 6 kgWarm air Max. load 6 kg Gentle smoothing Max. load 1 kgAltering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off this To switch off this warningProblem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is darkAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runLevelling the appliance Room ventilation Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data Woollens handcareTechnical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesFactory default. Not in current programme StandbyOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000