Miele T4819Ci operating instructions Cleaning the condenser unit, Removing the condenser unit

Page 30

Cleaning and care

Cleaning the condenser unit

Detergent residue, hair and fine fluff from the dryer can get through the fluff filters and block the condenser unit. Dust from the room in which the dryer is installed can also get into the condenser unit and cause a blockage.

Check the condenser unit at least once a year. Always check it if the Clean out airways indicator light comes on. Clean it if necessary.

Removing the condenser unit

Turn the lever on the inner cover downwards to the vertical position.

Tilt the cover forwards.

Remove it by pulling it diagonally upwards.

Open the service panel. Hold the panel securely when doing this.

Now remove the panel by pulling it diagonally upwards and place it to one side.

Turn the lever on the condenser unit upwards to the vertical position so that the hook on the lever is no longer in the groove at the bottom of the condenser unit housing.

30

Image 30

Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Start the programme Before the end of a programmeRemove the laundry at the end of the programme Extra options / Delay start Delay startExtra options Minimum iron Max. load 3 kg Normal, Hand iron Cottons Max. load 6 kg Extra dry, NormalHand iron, Machine iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Warm air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 6 kg Gentle smoothing Max. load 1 kgOnce a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off this Problem Possible cause RemedyAirways indicator To switch off this warningFlashing slowly Problem Possible cause Remedy Start/Stop button isProgramme indicator Display is darkAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runBefore moving the tumble dryer again e.g. when moving house Levelling the appliance Room ventilationWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesOff Factory default. Not in current programmeStandby Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000