Miele T4819Ci Problem Possible cause Remedy, Airways indicator, Light comes on, Reminder

Page 34

Problem solving guide

Problem

Possible cause

Remedy

The Clean out

The dryer is not working

– Cleaning the filters is

airways indicator

efficiently or economically.

usually all that is required.

light comes on.

Possible cause: the filters

However, if the reminder

 

are clogged with fluff or with

does not go out after you

 

detergent residues.

have cleaned the filters,

 

 

then also check all the

 

 

possible causes

 

 

described under "The

 

 

drying process goes on

 

 

too long or even switches

 

 

off".

 

 

To switch off this

 

 

reminder:

 

 

– Open and shut the door

 

 

with the dryer switched

 

 

on.

 

 

The Clean out airways

 

 

indicator light can be

 

 

deactivated (see

 

 

"Programmable functions").

The programme

See above for possible

To switch off this warning:

stops and

causes and their remedies.

– Open and shut the door

the Clean out

 

with the dryer switched

airways indicator

 

on.

light comes on.

 

– Then start the programme

The buzzer

 

again.

sounds.

 

– If this problem happens

 

 

again, contact Miele.

The Empty

The condensed water

– Empty out the condensed

container indicator

container is full or there is

water container.

light comes on.

kink in the drain hose.

– Check the drain hose.

The buzzer

 

To switch off this warning:

sounds.

 

– Open and shut the door

 

 

 

 

with the dryer switched

 

 

on.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect a programme Select any Extra options / Delay startDrying level programmes Before the end of a programme Start the programmeRemove the laundry at the end of the programme Delay start Extra options / Delay startExtra options Minimum iron Max. load 3 kg Normal, Hand iron Cottons Max. load 6 kg Extra dry, NormalHand iron, Machine iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Warm air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 6 kg Gentle smoothing Max. load 1 kgOnce a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off this Problem Possible cause RemedyAirways indicator To switch off this warningFlashing slowly Problem Possible cause Remedy Start/Stop button isProgramme indicator Display is darkAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runLevelling the appliance Room ventilation Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data Woollens handcareTechnical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesOff Factory default. Not in current programmeStandby Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000
Top Page Image Contents