Miele T4819Ci Electronic system lock, To activate the lock, To deactivate the lock

Page 25

Electronic system lock

The system lock prevents the dryer being used without your knowledge.

It can be activated if wished.

The dryer's electronics are then locked. The dryer can still be switched on but a programme cannot be started.

–If an attempt is made to start a programme, the indicator light for the Low temperature button will come on and a key symbol 0-§ will appear in the display.

The door is not locked and can be opened at any time.

To activate the lock

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

Press the Low temperature button and keep it pressed in whilst carrying out steps to .

Press the button.

The Automatic plus indicator light will come on.

Slowly turn the programme selector three positions stage by stage in a clockwise direction.

Each of the three programme indicator lights must come on one after the other.

Now slowly turn the programme selector six positions stage by stage in an anti-clockwise direction.

Each of the six programme indicator lights must come on one after the other.

The indicator light for the Low temperature button will flash, and the key symbol 0-§ will appear in the display.

Release the Low temperature button. The electronics have now been locked.

Switch the dryer off.

To deactivate the lock

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

The procedure is the same as for activating the lock. Carry out steps to as described previously.

At step the indicator light for the Low temperature button will stop flashing and the key symbol 0-§ will go out.

The electronics are no longer locked.

25

Image 25

Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect a programme Select any Extra options / Delay startDrying level programmes Before the end of a programme Start the programmeRemove the laundry at the end of the programme Delay start Extra options / Delay startExtra options Hand iron, Machine iron Cottons Max. load 6 kg Extra dry, NormalMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Cool air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 6 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off this To switch off this warningProgramme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is darkAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long orBeen cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteLevelling the appliance Room ventilation Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Woollens handcare Consumption dataTechnical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeStandby Factory default. Not in current programmeOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000