Miele T4819Ci Anti-crease off Hour anti-crease, Hours anti-crease factory default setting

Page 57

Programmable functions

Anti-crease

Anti-crease helps prevent creasing, if laundry is not normally removed im- mediately after the end of a programme.

The anti-crease function

–is activated when the tumble dryer is delivered. You can shorten the duration of the anti-crease phase or deactivate it if wished.

–is used in all programmes except Woollens handcare.

–should be left activated.

Follow the steps (,, ...) to programme and store in memory.

Before you begin, ensure that:

–The tumble dryer is switched off.

–The door is closed.

Press the Start/Stop button and keep it pressed in whilst carrying out steps

-.

Switch the dryer on.

Wait until the Start/Stop button lights up constantly . . .

. . . and then release the Start/Stop button.

Press the Low temperature button twice.

–The Low temperature indicator light will flash 3 times briefly.

A number to show which option is selected will appear in the display alternating with the letter P.

0Anti-crease off

i1 hour anti-crease

(the Automatic plus indicator light will also flash once).

22 hours anti-crease (factory default setting)

(the Automatic plus indicator light will also flash twice).

Pressing the Start/Stop button switches between the options.

Switch the dryer off.

The setting you have selected is now stored in memory. You can change it again at any time.

To check the setting:

Carry out steps to .

Switch the dryer off after step .

57

Image 57

Contents Operating instructions For condenser tumble dryer T 4819 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Start the programme Before the end of a programmeRemove the laundry at the end of the programme Extra options / Delay start Delay startExtra options Hand iron, Machine iron Cottons Max. load 6 kg Extra dry, NormalMinimum iron Max. load 3 kg Normal, Hand iron Delicates Max. load 2 kg Normal, Hand ironProgramme chart Cool air Max. load 6 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 6 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off this To switch off this warningProgramme indicator Problem Possible cause Remedy Start/Stop button isFlashing slowly Display is darkAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long orBeen cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteBefore moving the tumble dryer again e.g. when moving house Levelling the appliance Room ventilationWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Woollens handcare Consumption dataTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeStandby Factory default. Not in current programmeOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Alteration rights reserved/0113 Nr 844 000