Kenmore W10133487A manual Installation Requirements, Tools and Parts, Options

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

■Pliers (that open to 1⁹⁄₁₆" [39.5 mm])

■Flashlight (optional)

Tools needed for installation

■Open end wrenches 17 mm and 13 mm

■Level

■Wood block

■Ruler or measuring tape

Parts supplied:

AB

C

DE

A. Drain hose form

B. Inlet hose (2)

C. Inlet hose washers (4)

D. Transport bolt hole plug (4)

E. Beaded strap

Alternate Parts

Parts listed are available from your local Sears store or Sears Service Center. For further information, please call

1-800-4-MY-HOME®(1-800-469-4663).

If You Have	You Will Need to Buy
Laundry tub or	Sump pump system (if not already
standpipe taller	available)
than 96" (2.4 m)
Overhead sewer	Standard 20 gal. (76 L), 30" (76.2 cm) tall
	drain tub or utility sink and sump pump
	(available from local plumbing suppliers)
Floor drain	Siphon break, Part Number 285834;
	additional drain hose, Part
	Number 8318155; and connector kit, Part
	Number 285835
Drain hose too	4 ft (1.2 m) drain hose extension kit,
short	Part Number 285863
Water faucets	2 longer water fill hoses:
beyond reach of fill	6 ft (1.8 m) Part Number 76314,
hoses	10 ft (3.0 m) Part Number 350008

Options

Pedestal

You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (25.4 cm) or a 15.5" (39.4 cm) pedestal. The pedestal will add to the total height of the washer.

AB

A.10" (25.4 cm) pedestal

B.15.5" (39.4 cm) pedestal

This pedestal (with storage drawer) is available in several colors.

To order, call your local Sears store. For further information, please call 1-800-4-MY-HOME®(1-800-469-4663).

Pedestal	Approximate	Color	Part
Height	Height with		Number
	Washer
10" (25.4 cm)	48" (122 cm)	White	46822
15.5" (39.4 cm)	53" (135 cm)	White	57822

Stack Kit

Are you planning to stack your Kenmore washer and dryer? To do so, find the stack kit (8541503) in the drum of the matching Kenmore dryer. Follow instructions included with the kit. See “Location Requirements.”

5