Recommended installation spacing for recessed or closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in.2 *
(310 cm2)
3"* (7.6 cm)
| 3"* (7.6 cm) |
24 in.2 * | 1"* (2.5 cm) |
(155 cm2) |
|
*Required spacing
6"* (15.2 cm)
76" (193 cm)
5¹⁄₂"** |
|
|
| 1" |
| 27" |
| 1" |
|
|
|
| |||||
(14 cm) |
|
|
| (2.5 cm) | (68.6 cm) | (2.5 cm) | ||
*Required spacing
**For venting out the side, 1" (2.5 cm) spacing is allowed.
Drain System
The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See “Tools and Parts.”
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum
The top of the standpipe must be at least 30" (76.2 cm) high and no higher than 96" (2.4 m) from the bottom of the washer.
30" min. (76.2 cm)
AB
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 30" (76.2 cm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that may be purchased separately. See “Tools and Parts.”
The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer. Additional hoses might be needed.
28" min.
Recommended installation spacing for cabinet installation
30" min. (76.2 cm)
(71 cm)
■The dimensions shown are for the recommended spacing.
■For cabinet installation, with a door, the minimum ventilation openings in the top are required.
7" (17.8 cm) | 7" (17.8 cm) |
9"
(22.9 cm)
4" | 31½" | 1" | 1" | 27" | 1" |
(10.2 cm) | (80.0 cm) | (2.5 cm) (2.5 cm) (68.6 cm) | (2.5 cm) | ||
CD
7