LG Electronics DLG1102W, DLE1101W Important Safety Instructions, This is the safety alert symbol

Page 3

IMPORTANT SAFETY INSTRUCTIONS 3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

wWarning

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

w

This is the safety alert symbol.

 

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER, WARNING, or CAUTION. These words mean:

wDANGER

You can be killed or seriously injured if you don’t immediately follow instructions.

wWarning

You can be killed or seriously injured if you don’t follow instructions.

wcaution

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

•Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.

•Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance or any other appliances.

•Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

•Install the clothes dryer according to the manufacturer’s instructions and local codes.

•Save these instructions.

WHAT TO DO IF YOU SMELL GAS:

1.Do not try to light a match or cigarette, or turn on any gas or electrical appliance.

2.Do not touch any electrical switches. Do not use any phone in your building.

3.Clear the room, building, or area of all occupants.

4.Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions carefully.

5.If you cannot reach your gas supplier, call the fire department.

ENGLISH

Page 2 Page 4
Image 3
Page 2 Page 4
Contents No El2001J DrYerSpecial Features Protocol P154Sanitization Performance of Residential Clothes dryer This is the safety alert symbol Important Safety InstructionsBasic Safety Precautions Safety Instructions for Installation Exhaust/Ducting Failure to do so can result in electric shock or injury Table of Contents Drying rack Sold separately Optional accessoriesIntroducing Your Dryer PartsControl panel features Custom Program Cycle Completion Indicator with Check Filter ReminderFlow Sense Duct Blockage Sensing System Indicator DisplayPress and hold Installation InstructionsPreview installation order Leveling the dryerSee Venting the dryer Installation location requirementsSide of the dryer. See Connecting electric dryers ClearancesLeveling the dryer Recommended installation spacing for cabinet installationReversing the door Hinge screwSwing Door Adapter Duct Bracket Knockout Installing the side vent kitOption 1 Side Venting Option 2 Bottom VentingVenting the dryer Routing and Connecting Ductwork Correct VentingIncorrect Venting Connect the dryer to the type of gas shown on the nameplate Connecting gas dryersElectrical requirements for gas models only Failure to do so can result in fire, explosion, or deathConnecting the gas supply High-altitude installationsElectrical connection Electrical requirements for electric models only Connecting electric dryersConnecting electric dryers cont. USA only Four-wire connection for electric dryers Power cordUL-Listed Wire Power Cord Use UL-listed4-wire #10 AWG-minimum copper conductor cable Four-wire connection for electric dryers Direct wireThree-wire connection for electric dryers Power cord Use UL-listed3-wire #10 AWG-minimum copper conductor cable Three-wire connection for electric dryers Direct wireGas dryer must be permanently attached to the floor Final installation checkGAS Models Electric ModelsPress START/PAUSE button Installation test Duct checkCheck the display for results End of cycleCheck the duct condition Restricted or blocked airflowTE1 or tE2 PS or PF or nPBegin Cycle Operating the dryer3TURN on the Dryer Select a CycleCertified by NSF Cycle guideSensor dry cycles Manual dry cyclesSorting load Loading the dryerCheck the lint filter before every load To Save a Custom Program Cycle setting buttons Special functionsCustom program To Add Cycle Options to a CycleRegular cleaning MaintenanceBefore calling for service TroubleshootingSpecifications Smartdiagnosis Using SmartdiagnosistmWarranty Period HOW Service is Handled Page Secadora Panel DE Control Fácil Para Usar Características EspecialesEstas palabras significan Instrucciones Importantes DE SeguridadNo altere los controles Instrucciones DE Conexión a Tierra Instrucciones Importantes parapara la instalación Guarde Estas Instrucciones Tabla de contenidos Partes Accesorios opcionalesSecado en parrilla Adquirido por separado Pantalla DE Tiempo Y Estado Características del panel de controlBotones DE MÁS TIEMPO/MENOS Tiempo More TIME/LESS Time Programa Botón CyclesPrograma Personalizado Custom Program PantallaEstimated Time Remaining Recordatorio DE Verificar Filtro Check Filter ReminderInstrucciones Para LA Instalación Vista previa del orden de instalaciónPulse y mantenga Exterior. Consulte Requisitos de ventilación Requisitos del lugar de instalaciónEspacios de instalación Un lugar que permita la instalación correcta del sistema deNivelación de la secadora Inversion de la puerta Codo 11/2 Instalación del kit de ventilación lateralOpción 1 Ventilación lateral Opción 2 Ventilación inferiorCónexión del conducto de ventilación de la secadora Incorrecta Conexión del conducto de ventilación de la secadoraVentilación de escape CorrectaRequisitos eléctricos para modelos a gas únicamente Conexión de secadoras a gasConector flexible de acero Conexión del suministro de gasConexión eléctrica Instalaciones en lugares de gran altitudRequisitos eléctricos únicamente para modelos eléctricos Cómo conectar las secadoras eléctricas cont. Sólo EE.UU Se requiere un protector de tensión listado por UL Cómo conectar las secadoras eléctricasNeutro Negro Haga los finales de los 3 cables en forma de gancho Revisión de instalación final Modelos a GASModelos Eléctricos Pulse el botón INICIO/PAUSASTART/PAUSE Test de Instalación conducto de comprobarObserve la pantalla para conocer el resultado Fin del cicloCompruebe las condiciones del conducto Flujo de aire restringido o bloqueadoTE1 o tE2 PS o PF o nPSeleccionar UN Ciclo Cómo UsarFuncionamiento de la secadora Encender LA SecadoraCertificado por NSF Guía de ciclosCiclos de secado con sensor sensor dry Ciclos de secado manual manual dryClasificación de cargas Revise el filtro de pelusa antes de cada usoCómo cargar la secadora Botones de ajuste de ciclos Funciones especialesPrograma personalizado Limpieza regular MantenimientoAntes de llamar a mantenimiento ResoluciÓn de problemasEspecificaciones Utilización del SmartDiagnosis Más cercano Período DE Garantía Cómo SE Administra EL MantenimientoMantenimiento en el hogar In-Home Llame al 1-800-243-0000 y escoja la opción adecuadaPage Español Page Español Canada
Top Page Image Contents