8)Half Load Switch (51799) Replacement Procedure:
▪
▪
▪
▪
▪
▪
▪
▪
Unplug the unit.
Remove the top panel (Two screws behind and slide back)
Pull out the soap dispenser, plastic washer knob and dryer knob. Remove the control panel. (3 Screws)
Pull out the plastic switch cover for the half load switch.
Pull out the half load switch by matching the grooves in the panel pushing the switch towards the back.
Replace with the new switch and do the wiring as before / below. Fix all the parts back by following the reverse procedure.
Wiring: Half Load switch - bottom view
2 | 122 |
4 | 124 |
6 
126
Testing Procedure:
▪Cold Test:
1)When the half load button is not pushed in – There will be continuity between the terminals 4 & 6.
2)When the half load button is pushed in – There will be continuity between the terminals 4 & 2.
19