9)Half Heat Switch (50799) Replacement Procedure:
▪
▪
▪
▪
▪
▪
▪
▪
Unplug the unit.
Remove the top panel (Two screws behind and slide back)
Pull out the soap dispenser, plastic washer knob and dryer knob. Remove the control panel. (3 Screws)
Pull out the plastic switch cover for the half heat switch.
Pull out the half heat switch by matching the grooves in the panel pushing the switch towards the back.
Replace with the new switch and do the wiring as before / below. Fix all the parts back by following the reverse procedure.
Wiring: Half Heat switch - bottom view
4
6
134
136
Testing Procedure:
▪Cold Test:
1)When the half heat button is pushed in – There will be no continuity between the terminals 4 & 6.
2)When the half heat button is not pushed in – There will be continuity between the terminals 4 & 6.
20