12)Fan Motor (50732) Replacement Procedure:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Unplug the unit.
Remove the top panel (Two screws behind and slide back) The fan motor is mounted on the heater housing.
Unfix the support to the hater housing. (4 bolts on the top) Unfix the upper heater housing. (3 screws and a few clamps)
The blower / fan is mounted on the shaft of the fan motor with the help of a nut Unfix the nut (rotate it clockwise) and remove the blower.
Unfix the fan motor (4 screws on top).
Replace the same and do the wiring as before / below. Fix all the parts back by following the reverse procedure.
Wiring: Fan Motor
MV
TF
23