15)Speed Regulator (00791) Replacement Procedure:
▪
▪
▪
▪
▪
▪
▪
Unplug the unit.
Remove the top panel (Two screws behind and slide back)
The speed regulator is located on the right hand side at the back of the unit. Unfix the housing of the speed regulator. (2 screws at the back)
Slide out the speed regulator and replace the same. Do the wiring as before / below.
Fix all the parts back by following the reverse procedure.
Wiring: Speed Regulator |
RV1 |
RV2 |
RVF |
RV3 |
RV4 |
RV5 |
RV6 |
RV7 |
ePlease Note:
1)The wiring should be done as above, if you operate the unit interchanging a single wire there is a possibility that the speed regulator goes bad immediately.
26