11)Thermostat (00808) Replacement Procedure:
▪
▪
▪
▪
▪
▪
Unplug the unit.
Remove the top panel (Two screws behind and slide back)
The fusible link is located on the heater housing as shown in the figure.
There is a small fuse inside the covering held by the clamp crewed on the housing. Unfix the screw and replace the same and do the wiring as before / below.
Fix all the parts back by following the reverse procedure.
Wiring: Thermostat
FD
FDX
Testing Procedure:
▪Cold Test:
FE
FEX
1)Check the continuity between the two terminals with black dots and the two terminals with the red dots, if there is continuity the thermostat is good.
22