Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.
5. Remove screws securing Front Panel.
6. Remove screws securing Selector Switch.
7. Disconnect wires on Selector Switch. Note: Make note of wire location
Push-To-Start Switch
1. Disconnect power supply to unit.
2. Unscrew knurl nut
Timer
1.Disconnect power supply to unit.
2.Remove Timer Knob.
3.Remove Front Panel Screws.
3. Remove Front Panel.
4. Disconnect wires on switch.
4.Remove two screws securing Timer to Front Panel.
5.Disconnect wires on Timer.
Note: Make note of wire locations.
Machine-In-Use Light
1.Disconnect power supply to unit.
2.Remove Front Panel.
3.Slide light off lens.
4.Disconnect wire connection.
Selector Switch
1.Disconnect power supply to unit.
2.Remove Timer Knobs (for both dryers)
3.Remove four screws securing Facia to Front Panel.
4.Remove Selector Switch Knob.
54 | 16022904 Rev. 0 | ©2004 Maytag Appliances Company |