Maytag 2206679 important safety instructions Select Spin, Select Cycle Options

OPERATING INSTRUCTIONS

Step 5

SELECT SPIN

Press the arrow pad to select the Spin speed.

Max Extract – Use for heavy loads such as towels and bedding. Removes more water from loads during spin.

NOTE: To minimize wrinkling of wrinkle-free and no-iron fabrics, do not use the Max Extract spin option for these loads. Do not use the Spin Only cycle when cleaning bulky items. Do not overload the washer.

High/Flat Dry – Use for underwear, t-shirts and sturdy cottons or for items that will be laid flat to dry.

Medium – Use for jeans, wrinkle-free or “wash-and-wear” items and synthetics.

Low/Hang Dry – Use for delicate items needing a slow spin speed because of fabric and construction and for hang-dry items.

Step 6

SELECT CYCLE OPTIONS

Press the appropriate pad(s) to select one or more options.

Set Delay Time – Allows the start of any cycle to be delayed for up to 9 hours. Make the appropriate selections for your load, then press the up or down arrows to increase or decrease the delay time from one to nine hours. Press the Start/Pause pad to start the delay time countdown.To cancel a delay, press Off and reselect the cycle. Presoak – Adds 12 minutes of mostly soaking with minimal tumbling before the cycle. Can be selected with any cycle.

Extra Rinse – Adds an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes.

Signal – Press the Signal pad to increase or decrease the end of cycle signal volume.

5