English
Installing the Bottom Panel
The bottom panel blocks noises to provide you with the quietest performance possible during the wash cycle operation.
1. First, lay down the washer on its front side.
2. Place the panel against the bottom of the machine. Align the holes in the panel with the holes in the washer.
NOTE: Please ensure that the bottom plate is positioned properly before permanently screwing to bottom of the washer.
The side marked "face to floor" must be facing you when putting the screws in. The end marked "front" must be aligned with front of the washing machine.
FRONT
FRONT
FACE TO FLOOR
WARNING: Not facing the bottom plate properly or aligning the bottom plate to the front of washer will cause damage to washer!
3.Insert the screws through the holes of the panel into the bottom of the washer and tighten. (6 screws are supplied.)
4.Once all screws have been installed and the panel is in place, return the washer to its standing position.
Note: During this time, you may reroute the drain hose to the left or right side for draining. Just remove hose clamp and snake to other side, then
FRONT
11