Frigidaire 137134900B important safety instructions Reversing Door, Removing the door

REVERSING DOOR

Removing the door

1Protect flat work surface, such as top of dryer or floor near dryer, with a soft cloth or towel.

2Open dryer door and remove the two hinge screws. Remove lower screw first, then upper screw.

3Supporting door with both hands, squarely lift door and hinge upward approximately 3/8” (10 mm) so “T” post on back of hinge can slide out through “T” slot on front panel.

“T” SLOT IN

FRONT PANEL

“T” POST ON

DOOR HINGE

4Gently place dryer door face down on flat, covered work surface.

5Locate the 5 indented head screws (no. 1-5) in the small, circular recesses (at 11, 1, 4, 6, and 8 o’clock positions) of the inner door. Remove and save these 5 screws.

IMPORTANT

Do not attempt to remove the 2 “tamper-resistant” screws that hold the inner glass in place.

6Locate the 2 pan head screws (no. 6-7) on the inner door nearest the metal strike and center of hinge (9 and 3 o’clock positions). Remove and save these 2 screws.

7Separate inner door assembly from outer door assembly.

18