Reattaching the door
1Holding the door in both hands, squarely insert the “T” post on the back of the hinge into the “T” slot on the front panel and lower it to align the mounting holes.
“T” SLOT IN
“T” POST ONFRONT PANEL DOOR HINGE
2While supporting the door, install the upper pan head screw first and then the lower one.
NOTE
Correctly installed hinge screws will press hinge flush to front panel. Any gap between hinge and front panel will cause misalignment of strike to latch.
REVERSING DOOR
3Close the door and test operation of hinge, strike and latch.
21