Operation
Using the dryer
1.Open the door.
2.Check lint filter.
The filter should be cleaned before and after using the dryer. Cleaning i the filter reduces the drying time
and saves energy. (See page 22 for lint filter cleaning instructions).
iBleach may cause discoloration of
the dryer's colored surface. Therefore, it is important to keep bleach away from the colored surface of your dryer. If any bleach spills on the surface, use a moist paper towel to thoroughly clean it immediately.
i
7.Press the •Start/Stop" button. The •Start/Stop" indicator light illuminates.
iThe program starts with an
acoustic signal (if set).
If a standard program has been selected, the indicator lights indicate the progress of the program sequence.
i At program end an acoustic signa is emitted (if set) and the LED •Wrinkle block" illuminates.
iWhen the drying process is
complete | (program or | selected |
time program ended), the drum | ||
rotates at | specific intervals for | |
1 hour. |
|
|
This prevents the laundry from | ||
creasing. | The laundry | remains |
loose and | fluffy until | it is removed. |
The laundry should be removed | ||
before this time has | elapsed. |
|
|
|
| laundry | manufacturer. If drying |
3. Rotate | program selector | to the |
| woolen clothing and shoes, see | |
desired | program. |
|
| the information on page 22. | |
Select | the program which | Ensure that there is only laundry in the | |||
corresponds to the laundry in the | drum. Check that all items are | ||||
dryer from the program | selection | completely | in the drum. |
table (see page 18). | 6. Close the door. |
The dryer light turns on inside the | |
drum. |
|
i
The •Start/Stop" indicator light starts flashing.
The •Start/Stop" indicator light continues flashing.
i
If the door has not been closed properly, the dryer will not start.