Modifiers

Sensor Dry Preset Cycle Settings

Sensor Dry Cycles	Temperature
Load Type

HEAVY DUTY	High
Heavyweight mixed loads, cottons, jeans

NORMAL	Medium
Corduroys, work clothes, sheets

WRINKLE CONTROL	Low
Business casual clothes, permanent press, synthetics

DELICATE	Extra-Low
Lingerie, blouses, washable knit fabrics

Timed Cycles

Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the Timed Cycle Adjust up or down arrows. See “Changing Cycles, Modifiers and Options.”

NOTE: Timed Cycles may also be used with the dryer rack. See “Dryer Rack.”

Timed Dry

Use this cycle to complete drying if items are still damp after a Sensor Dry Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting.

Rapid Dry

Use this cycle for drying small loads or loads that need a short drying time.

Freshen Up

Use this cycle to help smooth out wrinkles from such items as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.

Timed Preset Cycle Settings

Timed Cycles	Default	Default Time
Load Type	Temperature	(Minutes)

TIMED DRY	High	40
Heavyweight, bulky items, work
clothes

RAPID DRY	Medium	24
Small loads

FRESHEN UP	Medium	20
Helps to smooth out wrinkles

Sensor Dry Cycle Modifiers

Use the DRYNESS button to select dryness levels for the Sensor Dry Cycles. Press DRYNESS until the desired Dryness setting illuminates.

The preset dryness setting is Normal when a Sensor Dry Cycle is selected. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, Normal, Less or Damp. Selecting More, Normal, Less or Damp automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.

NOTE: Dryness Level selections cannot be used with the Timed Cycles.

Timed Cycle Modifiers

Use the TEMPERATURE button to select temperatures for the Timed Cycles. Press TEMP until the desired temperature setting illuminates.

NOTE: Temperature modifiers cannot be used with the Sensor Dry Cycles.

Air Fluff

Use the Air Fluff Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Fluff.

Type of Load	Time*(Minutes)

Foam rubber - pillows, padded bras, stuffed toys	20 - 30

Plastic - Shower curtains, tablecloths	20 - 30

Rubber-backed rugs	40 - 50

Olefin, polypropylene, sheer nylon	10 - 20

*Reset cycle to complete drying, if needed.