4. Select the desired cycle
Steam Cycles:
Auto Refresh with Steam:
Reduces odors and light wrinkles from small to
Custom Refresh with Steam:
The cycle time defaults to 15 minutes. For larger loads, you may add additional time up to 50 minutes, in 5 minute increments, using the LCD control buttons.
Select the desired cycle for your load. See the “Cycle Guide” or the display for more information about each cycle.
If selecting Timed Dry, use the LCD control buttons to adjust the length of the cycle.
5. Set any cycle settings
The default cycle settings will be displayed on the LCD screen. You may adjust different settings, depending on whether you have selected a Sensor Cycle, Timed Cycle, or Steam Cycle. See the “Cycle Guide” for detailed information.
NOTE: Not all options and settings are available with all cycles. Not all cycles are on all models.
Sensor Cycles:
You can select a different dryness level, depending on your load, by pressing the button for More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.
Sensor cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.
Timed Cycles:
When you select a Timed Cycle, the default time is displayed. Use the LCD control buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments.
The default temperature may be changed by using the LCD control buttons to select the desired dry temperature.
Changing the Sensor Cycle settings to increase drying time
If all your loads on all Sensor Cycles are consistently not as dry as you would like or are too dry, you may change the default settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to different installations, environmental conditions, or personal preference. This change is saved in memory and will affect all of your Sensor cycles, not just the current cycle/load.
There are 5 drying settings:
Much damper clothes, 30% less drying time. Slightly damper clothes, 15% less drying time. Factory preset dryness level.
Slightly drier clothes, 15% more drying time. Much drier clothes, 30% more drying time.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (the power button is off) to adjust the default settings.
1.Before starting a Sensor cycle, press and hold the LCD control button for Dryness Level for 6 seconds. The LCD will briefly display the regular Dryness Level options, then change to show the default setting options.
2.Press the LCD control button for the desired setting.
3.Press the BACK button to return to the main screen for the selected cycle.
11