GE RPT 301 user manual Status, Identity, Command I,S/PIN, Name ValueCR format

22 RPT 301 User Manual

S - Status

This command returns the instrument status.

Command:	S
Reply:	STATUS nn
Where nn:	01	= Frequency outside limits
	02	= Diode voltage outside limits
	04	= Electronics failure

	Combination errors: a status 06 represents diode
	voltage and electronics failure.
Result:	no change
I - Identity

This command requests the unit to send items of data which describe the unit identity.

Command:	I
Reply:	type, range, S/N, cal date
Result:	No change in status or operation
Where:	Type	=	Equipment model (Druck RPT 301)
	Range	=	Pressure range, lower and upper and
			pressure type
	S/N	=	Transducer serial number
	Cal date =		Date of last calibration

Command: I,S/PIN, Name Value<CR> format

i.When Name = S, Value = nnnn/yy-mm Reply: S/N = nnn/yy-mm

Result: sets displayed serial number

ii.When Name = H, Value = nnnn Reply: HIGH RANGE = nnn mbar

Result: sets displayed highest operating pressure (mbar)

iii.When Name = L, Value = nnnn Reply: LOWEST RANGE = nnn mbar

Result: sets displayed lowest operating pressure (mbar)

K177 Issue No. 3