2 INSTALLATION
3. Coat exposed parts of nuts, bolts and washers with silicone sealant.
Radome |
base |
Platform |
Coat with silicone sealant.
Coating bolt, nut and washers with silicone sealant
4.Connect the three coaxial cables coming from the antenna unit to the appropriate coaxial cables on the antenna cable, referring to the table below.
Cable from antenna | Cable |
(no. marked on cable) | |
ANT 1 | No color |
ANT 2 | Yellow |
ANT 3 | Red |
5.Cover the antenna connectors with vulcanizing tape and vinyl tape, for waterproofing. Tie tape ends with a cable tie.
Waterproofing the antenna connector
6.Set the joints of the coaxial cables into the cavity in the antenna base.
7.Pass two cable ties (long life, temperature resistant type, local supply) through the hole shown in the figure below. Fasten them at the locations shown in the figure below.
Cable Tie