Furuno SC-50 manual Dgps Alarm Setup, Alarm menu, Buzzer options, Dgps alarm options

3. OPERATION

3.5DGPS Alarm Setup

The SC-50 can alert you with audible and visual alarms when GPS data, DPGS data and WAAS data are lost. To set the DGPS alarm, do the following:

1. Press the [MENU] key to show the menu.

MAIN MENU

	SATELLITE
ALARMS
MESSAGES	WAAS/DGPS
GPS SETUP	I/O SETUP
SYS SETUP	INST MENU
SOFT VER.	ERASE
OTHERS	TRIP MENU

Main menu

2. Choose ALARMS and then press the [ENT] key.

ALARMS

BUZZER : LONG

DGPS : OFF

Alarm menu

3. BUZZER is selected; press the [ENT] key.

SHORT

LONG

CONSTANT

Buzzer options

4. Use ▲ or ▼ to choose buzzer type desired and then press the [ENT] key.

SHORT:	Two short beeps
LONG:	Three long beeps
CONSTANT:	Continuous beep

5.Press the [ENT] key.

6.Use ▼ to choose DGPS and then press the [ENT] key.

OFF

ON

DGPS alarm options

7.Use ▲ or ▼ to choose OFF or ON as appropriate.

8.Press the [ENT] key.

9.Press the [DISP] key to close the menu.

3-6