Furuno SC-50 manual Trip Menu, Trip menu

3. OPERATION

3.12TRIP Menu

The TRIP menu functions to

•Choose the indication to show on the speed display

•Choose source of distance run

•Reset distance run to zero

•Smooth the tide drift indication

•Enter rate of turn (see the next page)

1.Press the [MENU] key to display the main menu.

2.Choose TRIP MENU and then press the [ENT] key.

TRIP MENU

DISTANCE DISP : DSTNC

DISTANCE CALC: GPS

RESET DISTANCE?

DRIFT AVG : 10SEC

SMOOTH ROT: 2.5 SEC

ROT RANGE: 60￿/MIN

TRIP menu

3.Choose DISTANCE DISP and then press the [ENT] key.

4.Choose what to display on the Speed display; distance run (DSTNC) or tide direction and speed (DRIFT). Press the [ENT] key.

5.Choose DISTANCE CALC and then press the [ENT] key.

6.Choose the source for distance run; GPS, VLW (distance traveled through water) or VBW (Dual ground/water speed). (VLW requires DS-80 type Doppler speed log and VBW requires Current indicator or Doppler speed log.) Press the [ENT] key.

7.Choose DRIFT AVG. and then press the [ENT] key.

8.If tide current and speed data is unstable, enter a smoothing figure to stabilize the data. The higher the figure the more smoothed the data. A setting between 0 (no smoothing) and 9999 is available.

9.Choose SMOOTH ROT and then press the [ENT] key.

10.Use the Omnipad to enter rate of turn smoothing rate. Choose location with ◄ or ►; change value with ▲ or ▼.

11.Press the [ENT] key.

12.Choose ROT RANGE and the press the [ENT] key.

13.Choose the range of the ROT graph from among 30, 60 and 90 and then press the [ENT] key.

14.Press the [DISP] key to close the menu.

3-20