Furuno DS-60 installation manual How to enter offset values, Meaning Setting range

3. MENU SETTINGS

2.Select an item, and press the [ENT] key to show the setting window. Refer to the table in below to enter the dimensions.

Item	Meaning	Setting range
LOA	Ship’s length	50.0 to 400.0 m
B	Ship’s width	5.0 to 100.0 m
L1	Horizontal distance from the ship’s bow to transducer	0.0 m to the setting value for “LOA”
L2	Horizontal distance from port to transducer	0.0 m to the setting value for “B”
L3	Horizontal distance from sip’s bow to GPS antenna	0.0 m to the setting value for “LOA”
L4	Horizontal distance from port to GPS antenna	0.0 m to setting value for “B”
L5	Horizontal distance from ship’s bow and CCRP (bridge)	0.0 m to setting value for “LOA”
D	Horizontal distance between transducers for DS-60 and	0.0 m to (“LOA”-”L1”)
	echo sounder.

3. Press the [MENU/ESC] key to close the menu.

3.2.3How to enter offset values

1. Press S to select [Offset Data], and [ENT] key to show the Offset Data menu.

2. Select [Trim], and press the [ENT] key.

3.Enter the offset value for inclined angle, and press the [ENT] key (setting range: -12.5 to

+12.5°, +: rise at bow).

4.Press T to select [Heel], and press the [ENT] key.

5.Enter the offset value for the heel, and press the [ENT] key (setting range: -12.5 to +12.5°, +: rise at port).

6.Press T to select [XDCR], and press the [ENT] key.

3-4