Schneider Electric PAS4S manual Manufacturers Declaration, MANUFACTURER’S Declaration

PAS4•S 1 Introduction

1.5Manufacturer's Declaration

MNA1MLSDM00EN, V2.01, 07.2009

MANUFACTURER’S DECLARATION

according to EC Directive on Machinery 98/37/EG

We hereby declare that the following product:

Designation:	Portal axis with toothed belt
	Portal axis with spindle
Type:	PAS41x, PAS42x, PAS43x, PAS44x
Product number:	73xx xxxx xxx

in the version delivered is intended for installation in a machine. Commissioning is prohibited unless the machine meets the regulations according to the EC directives. Please observe the safety instructions in our technical documentation.

Applied	EN ISO 12100-1:2003-11
harmonized	Safety of machinery basic concepts,
standards,	principles for design
especially	Part 1: Basic terminology, methodology
	EN ISO 12100-2:2003-11
	Safety of machinery basic concepts,
	principles for design
	Part 2: Technical principles and specifications
Applied national	Product documentation
standards and
technical
specifications,
especially
Company stamp:
Date/Signature:	30 July 2009

Name/Department: Wolfgang Brandstätter/Development

Portal axes with ball screw drive 17