Pioneer DJM-700-K, DJM-700-S operating instructions Effect Parameters, Beat Effect *1

EFFECT FUNCTIONS

EFFECT PARAMETERS

Beat Effect (*1)

Name		Beat Switch Parameter	Parameter 1 (TIME dial)		Parameter 2
					(LEVEL/DEPTH dial) contents
			Contents	Setting Range (unit)
1	DELAY	Sets delay time of 1/8 to 16/1	Sets delay time.	1 to 4 000 (ms)	Sets balance between original and
		per 1 beat of BPM time.			delay sound.
2	ECHO (*2)	Sets delay time of 1/8 to 16/1	Sets delay time.	1 to 4 000 (ms)	Sets balance between original sound
		per 1 beat of BPM time.			and echo sound.
3	TRANS	Sets cut time of 1/16 to 16/1	Sets effect time.	10 to 16 000 (ms)	Sets balance between original sound
		per 1 beat of BPM time.			and effect sound.
4	FILTER	Cycle of cutoff frequency shift	Sets cycle for cutoff	10 to 32 000 (ms)	Amount of effect increases when
		is set in unit of 1/4 to 64/1	time shift.		dial is turned clockwise.
		relative to 1 beat of BPM.
5	FLANGER	Cycle of flanger shift is set in	Sets cycle for	10 to 32 000 (ms)	Amount of effect increases when
		units of 1/4 to 64/1 relative to	flanger effect shift.		dial is turned clockwise. When dial is
		1 beat of BPM.			turned fully counterclockwise, only
					original sound is output.
6	PHASER	Cycle of phaser effect shift is	Sets cycle for phase	10 to 32 000 (ms)	Amount of effect increases when
		set in units of 1/4 to 64/1	effect shift.		dial is turned clockwise. When dial is
		relative to 1 beat of BPM.			turned fully counterclockwise, only
					original sound is output.
7	REVERB (*2)	Amount of reverberation is set	Sets amount of	1 to 100 (%)	Sets balance between original sound
		from 1 % to 100 %.	reverberation effect.		and effect sound.
8	ROBOT	Sets pitch of robot sound	Sets pitch of robot	–100 to +100 (%)	Amount of effect increases when
		effect within range of –100 %	sound effect.		dial is turned clockwise.
		to +100 %.
9	CRUSH	Cycle of crush effect	Sets cycle for crush	10 to 32 000 (ms)	Amount of effect increases when
		movement is set to 1/4 to 64/1	effect shift.		dial is turned clockwise. When dial is
		relative to a single beat of			turned fully counterclockwise, only
		BPM.			original sound is output.
10	ROLL (*2)	Effect time is set as 1/16 to 16/1	Sets effect time.	1 to 4 000 (ms)	Sets balance of original sound and
		relative of 1 beat of BPM.			roll sound.
11	REVERSE	Effect time is set as 1/16 to 16/1	Sets effect time.	1 to 4 000 (ms)	Sets balance of original sound and
	ROLL (*2)	relative of 1 beat of BPM.			roll sound.
12	UP ROLL (*2)	Effect time is set as 1/16 to 16/1	Sets effect time.	1 to 4 000 (ms)	Sets balance of original sound and
		relative of 1 beat of BPM.			roll sound.
13	DOWN ROLL	Effect time is set as 1/16 to 16/1	Sets effect time.	1 to 4 000 (ms)	Sets balance of original sound and
	(*2)	relative of 1 beat of BPM.			roll sound.
14	SEND/	—	—	—	Sets volume of RETURN input
	RETURN				sound.

(*1) When the effect channel selector is set to [CF.A], [CF.B], or [MASTER], even if the effect monitor is turned ON, if the selected channel’s sound is not output to the master output, the effect sound will not be heard.

(*2) When effect is disabled (OFF), the effect sound will not be heard, even if monitor is set to effector.

20

En