Pioneer DJM-700-K, DJM-700-S Connecting Inputs, Pioneer DJ CD players, Analog turntable

CONNECTIONS

Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

Pioneer DJ CD players

The audio output connectors of a DJ-type CD player can be connected to the CD input connectors (channel 1 or 2), or to the LINE input connectors (channel 1) of the DJM-700-S/DJM-700-K.

Connect the control cord to the CONTROL jack, and set the input selector switch to [CD] or [LINE].

Analog turntable

To connect an analog turntable, connect the turntable’s audio output cable to one of the channel 2 to 4 PHONO input connectors. Set the corresponding channel’s input selector switch to [PHONO]. The DJM-700-S/DJM-700-K’s PHONO inputs support MM cartridges.

Connect the ground wire from an analog turntable to the SIGNAL GND terminal of the DJM-700-S/DJM-700-K.

• Note that no PHONO input connector is provided for channel 1.

Connecting other line level output devices

To use a cassette deck or ordinary CD player, connect its audio output connectors to one of the DJM-700-S/DJM-700-K’s LINE input connectors (channel 1, 3, or 4) or to the CD input connectors (channel 1 or 2), and set the input selector switch to [LINE].

Input selector switch

BOOTH REC

L

POWER OFF

ON

1 GND 2 HOT

R

3 COLD R MASTER1 L

CH-4	CH-3	CH-2	CH-1
PHONO LINE	PHONO LINE	PHONO CD	LINE	CD

	L			L	L		L
								MIC 2
						CONTROL	CONTROL
	R			R	R		R
					SIGNAL GND
MASTER2		MASTER			SEND	RETURN	DIGITAL OUT	MIDI OUT
R	L			R	L(MONO) R	L(MONO)
			ATT.
						fs(Hz)
		-6dB	-3dB 0dB			48k	96k

CD player, etc.

Analog turntable Analog turntable DJ CD player DJ CD player Cassette deck, etc.

6

En