Omron NE-U22V How to Assemble the Main Unit, This unit must be assembled before it is used

How to Assemble the Main Unit

Unit	This unit must be assembled before it is used.
Main	– Parts may fit tightly since they are made to prevent the medication from leaking.
	– You must wash and disinfect all removable parts before using the unit.
the	Assemble the unit after washing, disinfecting, and drying.
Assemble	(For how to disinfect the unit, refer to Page 18)
	General Advice
to
	• Hold the unit securely with both hands.
How
	• Install the parts securely. (You may hear clicks depending on the parts
	at the time of installation.)
the Unit	1 Attach the Mesh Cap on the Medication Bottle.
	Insert the
Using
	Mesh Cap	Close it
	vertically.		You have finished
Before		securely.
			installation.

Do not open the bottle cap.

2Attach the Medication Bottle to the Main Unit.

Align both electrodes with each other.

You have finished installation.

How to Assemble the Main Unit

3Attach the Mask Adapter to the Main Unit.

			Before Using the
		You have finished	Unit
		installation.	Howto
4	Attach the supplied Mouthpiece or Child’s Inhalation Mask to the Mask Adapter.
•	How to attach the Child’s Inhalation Mask	• How to attach the Mouthpiece	Assemble the Main Unit

You have finished	You have finished
assembly.	assembly.

Now you have completed assembling the Main Unit.

– If you are not going to use the unit soon after it is assembled, disassemble the unit (as shown in the Figure to the right) and store in the supplied Storage Case or store it in clean environment.

(For the correct use of the unit, refer to Page 15)

8 9