SECTION 4—SEAT ASSEMBLY
Back Cane
Locknuts
Cane Bracket
Upper Hex Screw
Washers
Lower Hex Screw Slot
FIGURE 4.9 Removing/Installing the Back Canes
Replacing Seat Positioning Strap
NOTE: For this procedure, refer to FIGURE 4.10.
1.Remove the seat cushion from the seat pan.
2.Move the flip back armrests out of the way. Refer to Adjusting Flip Back Armrests on page 60.
3.Remove the two mounting screws, locknuts, washers and
4.Remove the two halves of the seat positioning strap from the rear seat frame.
5.Reposition the two new seat positioning strap inside of the seat frame as shown.
6.Reinstall the two mounting screws and
7.Reinstall the seat cushion onto the seat pan.
Mounting
Holes
| Mounting Screw |
| Seat Frame |
| |
Seat Frame | Locknuts |
| |
Mounting Screw |
|
| Washers |
Seat Positioning Strap Halves |
FIGURE 4.10 Replacing Seat Positioning Strap
Pronto® M71™ | 42 | Part No 1118377 |