Invacare M71 service manual Mounting Screw Arm Post Washers Locknut

SECTION 5—ARMS

5.Reinstall van style armrest pad. Refer to Replacing Van Seat Armrest Pads (Wheelchairs Built before October 2003) on page 56.

6.If necessary, install the joystick. Refer to Removing/Installing the Joystick, Van Seat Models on page 98.

7.Repeat STEPS 1-6 for the opposite armrest plate, if necessary.

Washer

Mounting

Screw

Washers

Locknut

Armrest

Plate

Arm Post

FIGURE 5.4 Replacing Van Seat Armrest Plate (Wheelchairs Built before October 2003)

Replacing Van Seat Armrest Pad Assembly (Wheelchairs Built After October 2003)

NOTE: For this procedure, refer to FIGURE 5.5.

1.If necessary, remove the joystick. Refer to Removing/Installing the Joystick, Van Seat Models on page 98.

2.Remove the mounting screw, washers and locknut that secure the existing armrest pad assembly to the arm post.

3.Position the new armrest pad assembly on the armrest post and secure with the mounting screw, washers, and locknut. Refer to FIGURE 5.4 for correct hardware orientation.

4.If necessary, install the joystick. Refer to Removing/Installing the Joystick, Van Seat Models on page 98.

5.Repeat STEPS 1-4 for the opposite armrest plate, if necessary.

Washer	Armrest Pad
	Assembly
Mounting Screw
	Arm Post
Washers	Locknut

FIGURE 5.5 Replacing Van Seat Armrest Pad Assembly (Wheelchairs Built After October

2003)

Part No 1118377 57 Pronto® M71™