Invacare M71 service manual Removing/Installing Side Rails, Adjusting the Seat Depth

SECTION 4—SEAT ASSEMBLY

DETAIL “A” - SEAT

DEPTH

MEASUREMENT

Rear

Arm

Socket

Side Rail

Measure Distance

Cane
Bracket		Front
	Side Rail	Arm
		Socket

Hex Screws

FIGURE 4.6 Adjusting the Seat Depth

Removing/Installing Side Rails

NOTE: For this procedure, refer to FIGURE 4.7 on page 39.

Removing Side Rails

1.Remove both armrests.

2.Remove the two hex screws, washer and lanyard securing the crossbars to the side rail.

3.Loosen, but DO NOT remove, the four hex screws securing the cane brackets to the side rails.

4.Loosen, but DO NOT remove, the four hex screws securing the front arm sockets to the side rails.

5.Use a screwdriver to gently tap the two roll pins out of the side rails.

6.Slide both cane brackets (with T-nuts and back canes) out of the slots in the side rails.

7.Slide both front arm sockets (with T-nuts) out of the slots in the side rails.

Pronto® M71™ 38 Part No 1118377