GE A071-0CG manual Ansi X3.28/SRIO DPA

		ANSI X3.28/SRIO DPA
GE Energy Services		CONFIGURATION GUIDE
NAME	RANGE	DESCRIPTION
Receive Squelch	00 .. 2147483647	Receiver squelch time in milliseconds.
		A typical Receive Squelch is 00.
Pre-Transmit	00 .. 2147483647	Pre-transmission RTS on time in milliseconds.
Delay		A typical Pre-Transmit Delay is 15.
Post-Transmit	00 .. 2147483647	Post-transmission RTS off time in milliseconds. This must be at
Delay		least 2 character times for reliable communication. A typical
		Post-Transmit Delay is 3 character times. Refer to Table 3 for
		character times at various baud rates.
CTS Timeout	00 .. 2147483647	Clear to Send (CTS) transmit timeout period in milliseconds.
		A typical CTS Timeout is 10.
ENQ Count	00 .. 32767	Default number of Enquiries (ENQs) to be retransmitted.
		A typical value is 3.
NAK Count	00 .. 32767	Default number of Negative Acknowledgements (NAKs) to be
		retransmitted.
		A typical value is 3.
ACK Timeout	00 .. 32767	Time duration to wait for an Acknowledgement (ACK) from the
		host station (1/38 sec).
		A typical value is 38 (1 second).
Master Address	00 .. 254	The address of the host (source) station with which this DPA is
		communicating. Address 255 is reserved as a broadcast address.
RTU Address	00 .. 254	The destination address this RTU is to respond as (0 through
		255). Address 255 is reserved as a broadcast address.
Valid Status	-128 .. 127	4 Entries indicating acceptable Status return values from the
		host. These status values apply only to events issued by the
		master, and not the status of the message.
		These values are typically set to 00.
Event Buffer Size	1 .. 32000	Size of the ANSI event buffer.
		A typical value is 1000.
Spontaneous	00 .. 32767	Spontaneous event timeout (in milliseconds) before a failure is
Timeout		logged.
		A typical value is 5000.
DI Retries	-1 .. 255	Number of digital event data retries before discarding event
		(-1 try forever).
		A typical value is 3.
AI Retries	-1 .. 255	Number of analog event data retries before discarding event
		(-1 try forever).
		A typical value is 3.
EV Retries	-1 .. 255	Number of EV event data retries before discarding event
		(-1 try forever).
		A typical value is 3.
SPA Event Retries	-1 .. 255	Number of SPA events retries before discarding event
		(-1 try forever).
		A typical value is 3.

A071-0CG-2.02-2Restricted

4 Full