GE A071-0CG manual Invalid parity configured None, Even, Odd, Invalid PD offset configured

Page 29

ANSI X3.28/SRIO DPA
CONFIGURATION GUIDE	GE Energy Services

Invalid parity configured (N)one, (E)ven, (O)dd

Cause:

•The configured parity is invalid.

Remedy:

•Ensure the configured Parity in A071MAIN is either None (N), Even (E), or Odd (O).

Invalid PD offset configured

Cause:

•The configured parameter data partition offset is invalid.

Remedy:

•Ensure the configured PD Offset in A071MAIN is a positive value.

•Ensure the configured PD Offset is less than the TM Offset.

Invalid Retransmit analog configured -1 to 255

Cause:

•The number of analog event data retries configured is invalid.

Remedy:

•Ensure the number of AI Retries configured in A071MAIN is in the range -1 through 255. (- 1 indicates try forever.)

Invalid Retransmit digital configured -1 to 255

Cause:

•The number of digital event data retries configured is invalid.

Remedy:

•Ensure the number of DI Retries configured in A071MAIN is in the range -1 through 255. (- 1 indicates try forever.)

Invalid Retransmit ev data configured -1 to 255

Cause:

•The number of EV event data retries configured is invalid.

Remedy:

•Ensure the number of EV Retries configured in A071MAIN is in the range -1 through 255. (- 1 indicates try forever.)

Invalid Re-transmit event configured -1 to 255

Cause:

•The number of SPA event data retries configured is invalid.

Remedy:

•Ensure the number of SPA Event Retries configured in A071MAIN is in the range -1 through 255. (-1 indicates try forever.)

Restricted

A071-0CG-2.02-2

Full	17

Image 29

Contents Ansi X3.28/SRIO DPA Trademark Notices Table of Contents Ansi X3.28/SRIO DPA List of Figures System Overview Xii Read Access FlagsAnsi X3.28/SRIO DPA List of Tables Viii Who Should Use this Guide About this GuidePurpose of this Guide Additional Documentation Product Perspective OverviewXii Ansi X3.28/SRIO DPA Configuration Tables Configuring TablesConfiguration Sequence Character Times Configuring the Main Table A071MAINAnsi X3.28/SRIO DPA GE Energy Services Baud Rate One Character Time ms Configuring the Mapping Tables Mapping Table Configuration Parameters Log-In User B014USER Configuring Wesmaint for the Ansi X3.28/SRIO DPARead Access Flags Error Messages Appendix AError MessagesFatal Error Messages Ansi Application process diedCant create required exchanges. Suspending Cant allocate rx sinksCant create T071 exchange Cant get enough memory for Ansi Application. SuspendingCant set configured bit rate Cant set communications timersCant spawn/activate E071 process Cant spawn/activate L071 processInvalid Analog Format configured 32 BIN, 6 or 3 BCD Invalid AI offset configuredInvalid AO offset configured Invalid checksum configured Bcc or CrcInvalid DI offset configured Invalid DD offset configuredInvalid do offset configured Invalid embedded response enable Yes or NoInvalid EV offset configured Invalid Evnt offset configuredInvalid modem enable Yes or No Invalid OBJ offset configuredInvalid PD offset configured Invalid parity configured None, Even, OddInvalid Retransmit analog configured -1 to Invalid Retransmit digital configured -1 toInvalid TM offset configured Invalid SYS offset configuredMapped AI point not Found. Check config Mapped AO point not Found. Check configMapped do point not Found. Check config Mapped DI point not Found. Check configMapped EV point not Found. Check config Missing Configuration ... DeletingAnsi X3.28/SRIO DPA Ascii Glossary of TermsWIN List of Acronyms and Abbreviations