GE A071-0CG manual GE Energy Services

ANSI X3.28/SRIO DPA
CONFIGURATION GUIDE				GE Energy Services
NAME		RANGE		DESCRIPTION
Power-Up Delay	00	.. 65535		Delay (in seconds) after start-up before the ANSI X3.28/SRIO
				DPA will begin responding to requests.
				A typical value is 10.
DI Offset	00	.. DO Offset		Offset (in words) to the start of the digital input table partition
				within the ANSI table.
				Normal setting is 00.
DO Offset	00	.. EV Offset		Offset (in words) to the start of the digital output partition
				within the ANSI table.
				Normal setting is 500.
EV Offset	00	.. AI Offset		Offset (in words) to the start of the event storage partition
				within the ANSI table.
				Normal setting is 750.
AI Offset	00	.. AO Offset		Offset (in words) to the start of the analog input partition within
				the ANSI table.
				Normal setting is 1000.
AO Offset	00	.. PD Offset		Offset (in words) to the start of the analog output partition
				within the ANSI table.
				Normal setting is 1500.
PD Offset	00	.. TM Offset		Offset (in words) to the start of the parameter data partition
				within the ANSI table.
				Normal setting is 2000.
TM Offset	00	.. EVNT Offset		Offset (in words) to the start of the time partition within the
				ANSI table.
				Normal setting is 2300.
EVNT Offset	00	.. DD Offset		Offset (in words) to the start of the event partition within the
				ANSI table.
				Normal setting is 2400.
DD Offset	00	.. Sys Offset		Offset (in words) to the start of the diagnostic data partition
				within the ANSI table.
				Normal setting is 2500.
SYS Offset	00	.. Obj Offset		Offset (in words) to the start of the system partition within the
				ANSI table.
				Normal setting is 3000.
OBJ Offset	00 .. 27000			Offset (in words) to the start of the object partition within the
				ANSI table.
				Normal setting is 5000.
Spontaneous	No (00)			Indicates whether or not spontaneous events are to be reported
Event Enable	Yes (non-zero)			to the host.
				A typical value is Yes.
Spontaneous Data	No (00)			Indicates whether of not spontaneous data is to be reported to
Enable	Yes (non-zero)			the host.
				A typical value is Yes.
Store	No (00)			Indicates whether or not the configuration should be stored.
Configuration	Yes (non-zero)			A typical value is No.
Analog Format	32	Bit Binary (32)		Format required by the host station for returned analogs.
Restricted				A071-0CG-2.02-2
Full			5