Corrections
Error
A food has been added to the accumulator under the wrong code number.
A food has been added to the accumulator under the wrong code number, but the error was noticed immediately.
Correction
Enter the wrong code, press "INP", enter the value, press
Leave the foodstuff on the weighing surface, eliminate the value by pressing "TARA", then remove the food from the weighing surface and subtract the negative value from the accumulator total by pressing "M+".
Individual digits can be deleted by pressing "MR" during manual input.
CHANGING THE CARBOHYDRATE CONVERSION FACTOR (BE)
The BE values saved in the diet computer are adapted to the formula:
1 BE = 10 g carbohydrate (factor 0.1).
If you wish to convert the BE values to the bread unit equivalent used in the past (1 bread unit equivalent (BE) = 12 g carbohydrate), press the "INP" key first and then the "BE" key. After entering factor 0.083 and confirming with the carbohydrate key, press the "INP" key once more. Your diet computer automatically reverts to the normal weighing mode.
CHANGING THE SET FOODS
If you wish to change the foods programmed into the diet computer, first of all switch the scales to weighing mode and then enter the code number of the food to be changed.
Press the "INP" key and then the key for the nutritional value concerned. Key in the value per 100 g of weight, or liquid density. Use the decimal point key on the numerical keypad instead of the comma.
18