
Variable Power Control
| High | ➢ |
|
| |
OL | Alto |
|
POWER CONTR |
| |
MAX |
| |
Low | Haut |
|
|
| |
Corto |
|
|
Bas |
|
|
FULL |
| ➢ |
| POWER CONTROL | |
| MAX |
|
VAC |
|
|
GAUGE |
|
|
| Lock into MAX | ➢ |
| Cerrado al posición |
|
| MAXIMO |
|
| Verrouiller à MAX |
|
This Vacuum cleaner is equipped with a variable power control which will allow you to select any cleaning power from low to high.
Set to LOW power for delicate fabrics such as draperies. Set to MAX or full power for more conventional carpet- bare floor cleaning.
To set to MAX or full power move the control knob fully to the right. When MAX is reached you will feel the control knob snap into the locked setting.
Thermal Protector
➢If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum.
➢During this time the headlight remains on.
➢To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace filters.
➢Replace full bag if necessary.
➢Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal protector has reset. Thermal protector will not reset if vacuum is not turned off even if vacuum cools down.
- 20 -