Removing Clogs
Hose
Manguera
Tuyau
Suction
Inlet Cover
Cubierta de
aspiración Couvercle de l’entrée d’aspiration
Short Hose
Manguera
corta Tuyau court
The hose located on the back of the vacuum cleaner carries the dirt from the nozzle up to the dust bag. If the hose should become clogged:
➢Unplug vacuum.
➢Pull open suction inlet cover and check for clogging.
➢Disconnect wand from short hose and check the wand and hose.
➢Plug in vacuum cleaner and turn on.
➢Disconnect wand and stretch hose in and out to remove clog.
➢If clog still exists, turn vacuum cleaner OFF and UNPLUG POWER CORD.
➢Turn vacuum over and inspect agitator area for clogs.
- 42 -